Thursday, March 5, 2020

Huawei Released Innovative 5G Microwave 50 Gbps Solution to Continuously Build a Simplified, Ultra-Broadband, and Easy-to-Deploy 5G Transport Network

Huawei Released Innovative 5G Microwave 50 Gbps Solution to Continuously Build a Simplified, Ultra-Broadband, and Easy-to-Deploy 5G Transport Network: Huawei released its latest innovative 5G microwave solution that offers a single-link with 50 Gbps bandwidth. Huawei also unveiled the first smart antenna that increases the E-band transmission distance by 50%.  hashtag

Source :
https://www.huawei.com/en/press-events/news/2020/2/innovative-5g-microwave-50gbps-solution?utm_source=dlvr.it&utm_medium=linkedin

[London, UK, February 25, 2020 ] Huawei released its latest innovative 5G microwave solution that offers a single-link with 50 Gbps bandwidth. Huawei also unveiled the first smart antenna that increases the E-band transmission distance by 50%. The latter solution greatly simplifies installation and enables E-band application to pole sites, accelerating 5G deployment.
As 5G sees more applications and deployments, higher bandwidth requirement are placed on the transport network. Huawei's 2T2R simplified E-band solution can well meet the capacity requirement to prepare 5G for further maturity. It integrates two channels into one piece of hardware and optimizes algorithms to increase the coding efficiency. Overall, this results in a bandwidth delivery of up to 25 Gbps, a 2.5-fold improvement over existing E-band. With 2T2R E-band, required devices as well as the tower bearing capacity and installation space are further reduced by 50%. With MIMO technology, the single-link bandwidth can reach up to 50 Gbps, which is sufficient to accommodate long-term evolution of 5G transport networks.
The E-band, which works on mmWave 80 GHz, is sensitive to physical stability due to the small antenna beam angle and therefore has high engineering installation requirements. Transmission over longer distances generally requires 0.6 meter antenna, which feature a smaller beam angle than 0.3 meter antenna and are installed in extremely demanding environments, including on walls or steady towers. To facilitate the deployment of long-distance E-band applications, Huawei developed the first smart microwave antenna solution. The solution delivers intelligent tracking of the antenna beam angle and provides a six times higher anti-shaking capability, greatly reducing the stability requirements. The E-band can now be deployed on pole sites, making it possible to mass-deploy E-band 0.6 meter antennas which can get 50% longer distance than before.
For traditional frequency bands ranging from 6 GHz to 42 GHz, Huawei further improved the "enhanced MIMO" solution capabilities. The solution now leverages optimized algorithms based on Huawei's deployment experiences to increase the MIMO distance by 50%, realizing commercial deployment of 12 km MIMO links. Furthermore, for telecom operators with limited spectrum resources, the solution allows for four-fold capacity increase to enable large-capacity expansion on more longer links, facilitating network evolution to 5G.
By the end of 2019, Huawei's 5G microwave had been deployed on 5G base stations in over 20 countries. In the Middle East, where the first wave of 5G construction was initiated, 61% of 5G base stations still use Huawei's 5G microwave as a means of transport.
Huawei's 5G microwave will continue in innovating towards simplified, ultra-broadband, and easy-to-deploy 5G microwave transport solutions. This enables customers to benefit using 5G transport network, overall accelerating the 5G construction process.

1 comments:

1l5i763526 said...

It does this by Underwear for Men producing a sequence of Cartesian coordinates known as tool paths via which the tip of the machining tool will journey, and converting them into basic CNC programming instructions known as G-codes. It additionally saves you time; when utilizing a three axis machine, you have to make use of very small cuts to realize a great surface end, outcomes in|which ends up in} longer lead instances. 5-axis machining refers to a machine's ability to move a tool or an element in five completely different axes concurrently. Basic machining operates on three primary axes, X,Y, and Z; nonetheless, a 5-axis CNC machining tool can rotate two extra axes, A and B, which give the cutting tool a multidirectional method. Multi-axis mills are unrivalled for creating square shapes, bevels, angles, slots and sophisticated curves – any subtractive machining process can be accomplished on a mill, including making spherical shapes.

Post a Comment

Popular Posts

Popular Posts



 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Affiliate Network Reviews | PhotoBooth Souvenir Instant | PhotoBooth Aksesoris Properti | PhotoBooth Untuk Souvenir | Rental Proyektor Infocus Bintaro